Rack Support Rails for 600mm depth 482.6mm (19") cabinet

Standard Rack rails in three different lengths. They require fixing holes which are set at right angles to the Rack fixing holes. The distance between the front and back fixing holes id the criterea for choosing the correct rails.

Standard Rack rails in three different lengths. They require fixing holes which are set at right angles to the Rack fixing holes. This is standard in most racks. The distance between the front and back fixing holes id the criterea for choosing the correct rails.

• Are fixed between the front and rear  column, to support equipment that is too heavy for the front colomn on its own

• The rack must be suitable for mounting screwed rails. Normally standard rack mounting screws are used.

• Galvanised finish.

• Made in Germany.